When you add a virtual camera (such as the 3uAirPlayer Virtual Camera) in Nimo TV, but no video appears, it is usually due to limited resolution compatibility with third-party virtual cameras.

Follow the steps below to resolve the issue:

Solution 1: Open Virtual Camera Settings

Using 3uAirPlayer as an example:

a. Open 3uAirPlayer.

b. Click Settings.

c. In the left sidebar, select Virtual Camera to enter the configuration page.

Solution 2: Adjust Output Resolution

In the Output Resolution dropdown menu, select a resolution supported by Nimo TV. Recommended resolutions: 1920 × 1080 or 1280 × 720.  After setting, save the changes and restart the virtual camera if necessary.

Solution 3: Re-select the Virtual Camera in Nimo TV

a. Open the Nimo TV client.

b. Go to Camera Settings (or Modify Camera).

c. In the Camera dropdown list, reselect your virtual camera (for example, 3uAirPlayer 1).

d. Click OK.

The virtual camera video should now display normally in Nimo TV.

Why This Happens: Nimo TV has limited support for the output resolutions of third-party virtual cameras. If the virtual camera outputs an unsupported resolution, the video may appear blank. Setting the virtual camera output to 1920×1080 or 1280×720 ensures compatibility and restores normal video display.