Easy Flash to Public iOS 11.1 using 3uTools
Apple releases iOS 11.1 with new emoji, 3D Touch app switcher and so on. Now you can upgrade to iOS 11.1 on 3uTools. Let's do it and enjoy all the new features.
As usual, remember to back up your iDevice before you flash it.
If your iDevice is already on iOS 11.1 beta 5, you don't need to upgrade to this public version, because there's no difference between these two versions. But if your iDevice is iPad Pro (10.5-inch) or iPad Pro (12.9-inch) (2nd generation), there are some updates on iOS 11.1.
Step 1 Connect your iDevice to PC using the USB cable and launch 3uTools on your PC.
Step 2 Go to "Flash & JB" -> "Easy Flash", and select the firmware iOS 11.1 as the following picture, then click "Flash". (Please note: If you want to save iDevice's data, you could select the checkbox that "Retain User's Data While Flashing".)
Step 3 Keep a good connection between iDevice and PC, and then just wait patiently till this process is finished. The process would last around 5 to 10 minutes, after that, you can experience iOS 11.1.
- Why Do I Need to Bind Apple ID Using 3uTools? How to register an Apple ID? How to Downgrade iPhone 4 from iOS7 to iOS6.1.3 without SHSH Blobs Using 3uTools? Downgrade iPhone 4s / iPad 2 to iOS 6.1.3 Using 3uTools How to Upgrade 16GB iPhone to 128GB through Replacing Hard Disk? If your iPhone, iPad or iPod won't Connect to 3uTools on Your PC, Try the Steps below. How to Solve the Issue 3uTools Frequently Shows Operation Failure ? 3uTools Downgrades iPhone 4 from iOS7.1.2 to iOS 6.0.1 Tutorial